Kinetic Determination of Acetylsalicylic Acid Using a CdTe/AgInS2 Photoluminescence Probe and Different Chemometric Models.

The combination of multiple quantum dots (QDs) in a multi-emitter nanoprobe can be envisaged as a promising sensing scheme, as it enables obtaining a collective response of individual emitters towards a given analyte and allows for achieving specific analyte-response profiles. The processing of these profiles using adequate chemometric methods empowers a more sensitive, reliable and selective determination of the target analyte. In this work, we developed a kinetic fluorometric method consisting of a dual CdTe/AgInS2 quantum dots photoluminescence probe for the determination of acetylsalicylic acid (ASA). The fluorometric response was acquired as second-order time-based excitation/emission matrices that were subsequently processed using chemometric methods seeking to assure the second-order advantage. The data obtained in this work are considered second-order data as they have a three-dimensional size, I × J × K (where I represents the samples' number, J the fluorescence emission wavelength while K represents the time). In order to select the most adequate chemometric method regarding the obtained data structure, different chemometric models were tested, namely unfolded partial least squares (U-PLS), N-way partial least squares (N-PLS), multilayer feed-forward neural networks (MLF-NNs) and radial basis function neural networks (RBF-NNs).

Chemometric-assisted surface-enhanced Raman spectroscopy for metformin determination using gold nanoparticles as substrate.

A fast, simple, and reliable method for determination of metformin was developed by coupling surface-enhanced Raman spectroscopy (SERS) with chemometric methods. This relayed on the utilization of a portable Raman spectrometer and of citrate stabilized gold nanoparticles (AuNPs) as substrate, to carry out the measurement of SERS scattering signals, thus assuring improved sensitivity. The obtained datasets were analysed using principal component analysis (PCA) and partial least squares (PLS) regression. Upon optimization of the PLS model, in terms of latent variables, spectral region and pre-processing techniques, RMSECV and R2CV values of 0.42 mg/L and 0.94, respectively, were obtained. The optimized PLS regression model was further validated with the projection of commercial pharmaceutical samples, providing good results in terms of R2P (0.97), RE (4.54 %) and analytical sensitivity (2.13 mg/L).

Photoluminescent and visual determination of ibandronic acid using a carbon dots/AgInS2 quantum dots ratiometric sensing platform.

A sensing platform combining carbon dots (CDs, with blue emission) and thiomalic acid (TMA)-capped AgInS2 quantum dots (QDs, with orange emission) was developed aiming the photoluminescence (PL) ratiometric determination of ibandronic acid (IBAN), a bisphosphonate pharmaceutical. The ternary AgInS2 QDs were used for IBAN probing, undergoing a concentration-related PL quenching in its presence, whilst the PL of CDs remained practically unaffected due to its chemical inertness towards the antiresorptive drug, provided an intrinsic self-reference fluorophore. In addition, a visual sensing approach was also proposed, employing for the first time ternary QDs. This relied on RGB images acquired by means of a digital camera and seek the development of a rapid IBAN screening test. The developed sensing platforms were employed for IBAN determination in samples with pharmaceutical interest providing good results, in accordance to the reported IBAN levels, and obtaining recovery values between 98 and 103%.

Chemometric-assisted kinetic determination of oxytetracycline using AgInS2 quantum dots as PL sensing platforms.

In this work a kinetic fluorometric methodology relying on the time-based monitoring of the photoluminescence quenching of AgInS2 ternary quantum dots induced by oxytetracycline, was developed. The kinetic approach allowed not only to reduce the LOD and improve sensitivity and selectivity but also to collect second-order data that was explored for the quantification of the target analyte in the presence of uncalibrated interfering species. Upon processing the acquired second-order kinetic PL data by unfolded partial least-squares (U-PLS), oxytetracycline was quantified in commercially available pharmaceutical formulations. The obtained results, namely an R2P higher than 0.99 and RE lower than 8%, proved the suitability and accuracy of the developed approach.

Comparison of near infrared spectroscopy and Raman spectroscopy for the identification and quantification through MCR-ALS and PLS of peanut oil adulterants.

Peanut oil is considered one of the best frying oils, and, consequently there is an increasing worldwide demand. This has led to adulteration practices with unhealthy, synthetic or less expensive oils which raises concerns related with public health safety. Therefore, there is a high need for rapid, versatile, low-cost and reliable analytical methods, such as vibrational spectroscopic techniques, capable of identifying and quantifying the respective adulteration. The objective of this work focused on the application of two different vibrational spectroscopic techniques (NIR and Raman spectroscopy) for the qualitative and quantitative analysis of two adulterants in pure peanut oil, namely corn oil and vegetable oil. For the quantitative analysis two chemometric methods, namely PLS and MCR-ALS, were compared while for the qualitative analysis only MCR-ALS was tested. The analysis of peanut oil adulteration was performed by adding each adulterant individually and also by blending the peanut oil with both adulterants simultaneously. A total of 69 samples were analyzed, which was comprised by two sets of 20 samples each containing just one adulterant and another set of 29 samples containing both adulterants. Several pre-processing techniques were tested. The qualitative analysis performed by MCR-ALS allowed the identification of all the adulterants using both NIR and Raman spectra, with correlation coefficients higher than 0.99. For the quantification, none of the chemometric methods as well as the vibrational spectroscopic techniques tested showed significant better results. Nonetheless, the determination coefficients and the relative percentage errors for the validation samples for most of the developed models were higher than 0.98 and lower than 15%, respectively. Concluding, MCR-ALS was capable of correctly extracting the spectral profiles of all the adulterants in very complex mixtures (as the pure spectra of the adulterants and peanut oil are very similar) and both MCR-ALS and PLS were able to quantify the adulteration with low RE. To the best of our knowledge, it was the first time that MCR-ALS was used for the qualitative analysis of peanut oil adulteration (with all adulterants added simultaneously) and MCR-ALS and PLS were compared for the quantification of peanut oil adulteration using both NIR and Raman spectroscopy.

Determination of atenolol based on the reversion of the fluorescence resonance energy transfer between AgInS2 quantum dots and Au nanoparticles.

The present work focused on the development of a fluorescence resonance energy transfer (FRET)-based sensing platform for the monitoring of atenolol in pharmaceutical formulations. The implemented approach involved the assembly of d-penicillamine-capped AgInS2/ZnS quantum dots (QDs), as energy donors, and gold nanoparticles (AuNPs) as acceptors and the establishment of electrostatic interaction between both capping ligands at the nanoparticle surface, which induced the inhibition of the ternary QD photoluminescence (PL). The presence of a ZnS shell around the ternary QD core and the use of cysteamine (CA) as the AuNP capping ligand, instead of the typical citrate, allowed a more efficient FRET process to occur. The ability of Cd-free ternary QDs to be used as a sensing element in FRET-based assays was demonstrated, emphasizing the advantages relative to the common Cd-based QDs, when seeking the implementation of more environmentally friendly and less toxic analytical methodologies. The influence of several ß-blocker drugs on the FRET donor-acceptor assemblies was thoroughly assessed. Atenolol and nadolol caused the aggregation of CA-AuNPs via hydrogen bonding interactions which reduced the spectral overlap between the donor and acceptor, impairing the FRET process and consequently the emission of the QDs was restored. Under the optimized conditions, the obtained results exhibited a linear relationship between the QD PL recovery signal and atenolol concentration of up to 11.22 mg L-1 with a detection limit of 1.05 mg L-1. This FRET sensing platform was successfully applied in the determination of atenolol in pharmaceutical formulations with recovery values ranging from 97.4 to 104.3%.

Detection of melamine and sucrose as adulterants in milk powder using near-infrared spectroscopy with DD-SIMCA as one-class classifier and MCR-ALS as a means to provide pure profiles of milk and of both adulterants with forensic evidence: A short communication.

The present short communication reports a promising analytical method for authentication of milk based on first-order near-infrared (NIR) spectroscopic data coupled to data driven soft independent modeling of class analogy (DD-SIMCA). This one-class classifier was able to correctly classify all samples of genuine milk powder as members of the target class from samples of milk powder adulterated with melamine and sucrose in a concentration range of 0.8-2% (w/w) and 1-3% (w/w), respectively. Multivariate curve resolution - alternating least-squares (MCR-ALS) was applied as a complementary chemometric model to DD-SIMCA aimed at retrieving pure profiles, allowing to identify the chemical composition of samples properly attributed in the target class or not, providing further investigation from forensic point of view. In order to extend the prime focus of the present report, which was aimed at developing an appropriate chemometric model for authentication purposes, the quantification analysis was also performed. This was done by successful bilinear data decomposition of NIR spectra into pure profiles for the contributing components contained in the system studied (milk and adulterants), allowing to quantify analytes with strong overlapping profiles, even in the presence of an uncalibrated interferent, as demonstrated in this short communication using MCR-ALS under various constraints in order to decrease the rotational ambiguity.

Dual-emission CdTe/AgInS2 photoluminescence probe coupled to neural network data processing for the simultaneous determination of folic acid and iron (II).

This work focused on the combination of CdTe and AgInS2 quantum dots in a dual-emission nanoprobe for the simultaneous determination of folic acid and Fe(II) in pharmaceutical formulations. The surface chemistry of the used QDs was amended with suitable capping ligands to obtain appropriate reactivity in terms of selectivity and sensitivity towards the target analytes. The implementation of PL-based sensing schemes combining multiple QDs of different nature, excited at the same wavelength and emitting at different ones, allowed to obtain a specific analyte-response profile. The first-order fluorescence data obtained from the whole emission spectra of the CdTe/AgInS2 combined nanoprobe upon interaction with folic acid and Fe(II) were processed by using chemometric tools, namely partial least-squares (PLS) and artificial neural network (ANN). This enabled to circumvent the selectivity issues commonly associated with the use of QDs prone to indiscriminate interaction with multiple species, which impair reliable and accurate quantification in complex matrices samples. ANN demonstrated to be the most efficient chemometric model for the simultaneous determination of both analytes in binary mixtures and pharmaceutical formulations due to the non-linear relationship between analyte concentration and fluorescence data that it could handle. The R2P and SEP% obtained for both analytes quantification in pharmaceutical formulations through ANN modelling ranged from 0.92 to 0.99 and 5.7-9.1%, respectively. The obtained results revealed that the developed approach is able to quantify, with high reliability and accuracy, more than one analyte in complex mixtures and real samples with pharmaceutical interest.

Isolation and physicochemical characterization of different lignin streams generated during the second-generation ethanol production process.

Four different lignin samples were isolated during the processing of rice straw for ethanol production: one after mild alkaline pretreatment (deacetylation) of rice straw, and other three after simultaneous saccharification and fermentation (fermentation residues), under different process conditions. Then, a complete chemical characterization in terms of main components (lignin, carbohydrates, among others) and elemental composition was performed for all the samples. Additionally, the structural and morphological characteristics, calorific value, thermal stability, solubility in solvents and antioxidant potential were also determined. For comparison, a standard lignin (Kraft lignin) was also assayed. The results revealed that the process used for lignin isolation has an important influence in the final properties of the sample. In general, the fermentation residues contained non-hydrolyzed polysaccharides in their composition and lower lignin content when compared to the lignin solubilized in the alkaline liquor. Among several organic solvents and mixtures, acetone 80% (v/v) was the most efficient for lignin solubilisation. Interesting properties and characteristics were observed for all the lignin samples isolated from rice straw processing, which would allow their application in different industrial areas. Based on the properties, potential applications were suggested, which could be of value for integration in biorefineries.

Multiplexed analysis combining distinctly-sized CdTe-MPA quantum dots and chemometrics for multiple mutually interfering analyte determination.

Semiconductor quantum dots (QDs) have demonstrated a great potential as fluorescent probes for heavy metals monitoring. However, their great reactivity, whose tunability could be difficult to attain, could impair selectivity yielding analytical results with poor accuracy. In this work, the combination in the same analysis of multiple QDs, each with a particular ability to interact with the analyte, assured a multi-point detection that was not only exploited for a more precise analyte discrimination but also for the simultaneous discrimination of multiple mutually interfering species, in the same sample. Three different MPA-CdTe QDs (2.5, 3.0 and 3.8nm) with a good size distribution, confirmed by the FWHM values of 48.6, 55.4 and 80.8nm, respectively, were used. Principal component analysis (PCA) and partial least squares regression (PLS) were used for fluorescence data analysis. Mixtures of two MPA-CdTe QDs, emitting at different wavelength namely 549/566, 549/634 and 566/634nm were assayed. The 549/634nm emitting QDs mixture provided the best results for the discrimination of distinct ions on binary and ternary mixtures. The obtained RMSECV and R2CV values for the binary mixture were good, namely, from 0.01 to 0.08mgL-1 and from 0.74 to 0.89, respectively. Regarding the ternary mixture the RMSECV and R2CV values were good for Hg(II) (0.06 and 0.73mgL-1, respectively) and Pb(II) (0.08 and 0.87mg L-1, respectively) and acceptable for Cu(II) (0.02 and 0.51mgL-1, respectively). In conclusion, the obtained results showed that the developed approach is capable of resolve binary and ternary mixtures of Pb (II), Hg (II) and Cu (II), providing accurate information about lead (II) and mercury (II) concentration and signaling the occurrence of Cu (II).